English
Español
Português
Français
Русский
ViệtBrief Introduction:
The B•ZSN-II plastic injection moulding machine uses the double-mould alternative forming way which learns from foreign technologies. Based on our second generation, this machine has the high productivity. Besides, two workers are needed to press the joint mold, when the machine worked. In order to keep safe of workers, don't touch the middle of the mould.
B.ZSN-II plastic injection moulding machine can remodel on screw and input in a fixed quantity at a specific position. The whole production process is fluent and completed, and this machine can control temperature and jet press in different sectors.
B•ZSN-II Plastic Injection Moulding Machine
With firing rate and stepless adjustment, it is convenient to clean the pipe, adjust the mold. With pneumatic interlocking and small installation space makes sure that it is convenient to assemble and disassemble the mould.
Tube should-injection mould diameter is 12.7mm-60mm. The shape of the mould is ellipse and round; of course, except screw shape, we can produce the products according to the customers' need.
Features:
1. B.ZSN-II plastic injection moulding machine uses four-column vertical compression mold-locked; with Chinese and English control and screen display, it ensures fluent operation and fast speed. Dual ratio pressure and oil flow control optimizes the mechanical structure.
2. Sliding floor uses nodular cast iron. Moreover, with lubricated hole, the connect point is steel isolation so that it can reduce the abrasion of slide plate and small transmutation and prolong the using time and increase precision.
3. Different slide plate can be available if use to match ejector; stroke, stripping force, ejector operate speed can be adjusted freely; at the same time, the stripping times can be preset in accordance with demands.
4. Safety operation: single plate is doing reciprocating movement, and insert device and fetch device operate outside.
5. The machine has double slide plate to use it to slide left and right; one mold molding and one mold operating outside so that can increase 30-50% work efficiency.
6. This machine has diversity of oil system design: semi-closed, closed, servo or high speed injection.
7. Equipped with automatic embedded and fetch device, this machine is fully automatic.
Main Technical Parameters of B•ZSN-II Plastic Injection Moulding Machine:
| Model | Units | B.ZSN-II | ||
| Injection system | Screw Diameter | MM | ￠32 | ￠36 |
| Injection Pressure | Kg/C㎡ | 1662 | 1313 | |
| Theoretical Shot Volume | CM³ | 96 | 122 | |
| Max. Shot Weight | g/oz | 86/3.0 | 109/3.8 | |
| Injection Rate | CM³/sec | 58 | 73 | |
| Temperature Control | Zone | 4 | ||
| Material Hopper Capacity | L | 20 | ||
| Clamping system | Clamping Force | T | 40 | |
| Opening Force | T | 8.3 | ||
| Distance between Tie Bars | Mm | 415*255 | ||
| The Biggest Contain Mold Space | Mm | 400*250 | ||
| Min Mold Height | Mm | 150 | ||
| Opening Stroke | Mm | 200 | ||
| Max Open Daylight | Mm | 350 | ||
| Ejector Force | T | 1.3 | ||
| Ejector Stroke | Mm | 40 | ||
| Hydraulic Electric system | Max Hydraulic Pressure | Kg/ C㎡ | 140 | |
| Pump Output | L | 160 | ||
| Pump Motor Power | Kw | 5.5 | ||
| Barrel Heating Power | Kw | 4.1 | ||
| Total Wattage | Kw | 9.6 | ||
| Slip form system | Slide Plate Size | Mm | 840*390 | |
| Slide Plate Stroke | Mm | 420 | ||
| Round Set Diameter | Mm | - | ||
| Others | Machine Weight | T | 1.3(1.9) | |
| Size (L*W*H) | m | 1.8*1.2*2.6 (2.1*1.1*2.6) | ||
TallKee Industry is a professional manufacturer and supplier of plastic injection moulding machine in China. With 15 years experience of producing, selling and service in this products, we have exported plastic injection moulding machine worldwide like the United States, Japan, Russia, Australia, New Zealand, Indonesia, Malaysia, India, Burma, Italy, France, Nigeria, Vietnam, Iran, Syria, Kazakhstan, Poland, Romania etc, more than 80 countries and regions, and gain great reputation among those customers. If you need plastic injection moulding machine, please contact us.
- Tube Holing Sealing Capping MachineTube holing sealing capping (screwing) machine B•ZFG-Ⅱ is used to open the hole in the head of plastic aluminum-plastic laminated tube and then seal the hole with aluminum foil, at last, cap the tube. As an ideal machine for manufacturing plants, it has the both PLC control and screen-touch interface programs...